You're in Home Hardware
Need a Personal Shopper?
Subscribe to
Bizrate emails for the hottest
deals & products,
PLUS a chance to
WIN $25
sign me up!
New winners chosen weekly.
No purchase necessary.
Best Seller | This is a B-tab tandem roller assembly. The adjustable stamped steel housing is 11/16 in. wide, 1-1/16 in. tall with a flare width of 13/16 in.. The B- tab secures the assembly as the mounting screw is driven up through the B-tab hole and into the... ... more | go to store |
This is a U-back patio door roller assembly with a 1-1/2 in. concave (center grooved) steel ball-bearing roller. When installed the U-back housing is drawn tightly into position against the side stile as the mounting screw is tightened. The housing is... ... more | go to store |
This is a unique back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller used exclusively on Peachtree Citation III series doors. The stamped steel housing has a unique design that is 7/8 in. wide, 1-9/16 in. tall and 2-1/4... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It is rear adjusting with a 1/4-20 threaded mounting hole on the back end and an optional use #10-32 threaded hole on top. Used by Fleetwood and a... ... more | go to store |
This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. Its plain back diecast is 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a... ... more | go to store |
This is an diecast plain back patio door roller assembly with a 1-1/2 in. concave Plastic ball bearing roller. The dimensions are 13/16 in. wide, 1-3/16 in. tall and 1-1/2 in. long. There is a 1/4-20 threaded mounting hole in the back end and a 10-32... ... more | go to store |
This sliding glass door roller assembly is constructed from steel and features height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth and... ... more | go to store |
This is an E-tab tandem roller assembly with two 1-1/2 in. concave steel ball-bearing rollers. As the corner screw passes through the E- tab it captures the roller assembly and positions it in the door's bottom rail. The housing is 11/16 in. wide with... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/8 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 5/8 in. wide, 1 in. tall and 2-1/8 in. long. It is rear adjusting with a 1/4-20 threaded mounting hole on... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It is 3/4 in. wide with a 27/32 in. flare, 1-5/8 in. tall and 1-1/2 in. long (not including the inner roller housing). It is rear adjusting... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 21/32 in. wide with a 3/4 in. flare and 1-1/8 in. tall. It is rear adjusting with a threaded mounting... ... more | go to store |
This is a Plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide with a 27/32 in. flare, 1-1/8 in. tall and 2-7/16 in. long. It is rear adjusting with a... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved Plastic ball bearing roller. It has a plain back housing that is 5/8 in. wide and 1 in. tall with two mounting tabs/hooks on the top. It is rear adjusting with a 1/4-20... ... more | go to store |
This is a plain back tandem plain back roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable. Used by Keller as well as a variety of other manufacturers, primarily on vinyl patio... ... more | go to store |
This is a plain back tandem roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable. Used by a variety of manufacturers of vinyl patio doors. The housing is 3/4 in. wide and 1 in. tall... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/2 in. tall with a flare width of 13/16 in. It is a rear adjusting with a 1/4-20 threaded... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/2 in. tall with a flare width of 13/16 in. and features a rear adjusting with a 1/4-20... ... more | go to store |
This is a 1-1/4 in. diameter concave Precision steel ball bearing roller replacement, used on several patio and wardrobe door roller assemblies. Precision rollers are made of hardened steel and have a sealed ball bearing race. It has a 7/32 in. built... ... more | go to store |
This sliding glass door roller assembly is constructed from steel and features a height-adjustable housing. The concaved (grooved) edge wheels installed in these roller assemblies are constructed of plastic and include steel ball bearings for smooth... ... more | go to store |
Are you having trouble sliding your screen door open or closed? Have you checked your rollers/roller assemblies? Don’t replace the entire door. For a fraction of the cost of a new door, replace those worn-out rollers. This sliding screen door corner... ... more | go to store |
This is a stainless steel unique housing tandem roller assembly, often found on Andersen sliding patio doors as well as a variety of other manufacturers of wood patio doors. It has two 1-1/4 in. concave stainless steel ball bearing rollers set in a... ... more | FREE shipping go to store |
This is a plain back patio door roller assembly with a 1-1/2 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 3/4 in. wide and 1-3/8 in. tall. It is rear adjusting with a 1/4-20 threaded mounting hole on the back... ... more | go to store |
This is a plain back patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. It has a plain back housing that is 11/16 in. wide and 1-1/4 in. tall with a flare width of 13/16 in. with a rear adjusting screw. Features a... ... more | go to store |
This is a plain back tandem roller assembly with two 1-1/2 in. concave or grooved steel ball bearing rollers. The stamped steel housing is adjustable and is used by a variety of manufacturers of vinyl, aluminum or wood doors. The housing is a plain... ... more | go to store |
This is a universal design roller. It has a 1-1/4 in. steel ball bearing roller. Adjustable diecast housing assembly. Used by Fleetwood, Full view and a variety of other glass door manufacturers. | Prime-Line Roller Assembly, 1-1/4 in. Steel Ball... ... more | go to store |
This Pocket Door Top Roller is constructed from nylon and comes affixed to a die cast bracket. It is used as a fixed back roller on pocket doors. This style roller fits on E-Z Glide and similar styled pocket doors. | Prime-Line 1-1/4 in. Nylon Pocket... ... more | go to store |
This roller is constructed from steel. It comes affixed to an adjustable steel housing with an 1-1/4 in. diameter roller. Used by a variety of glass door manufacturers. | Prime-Line Sliding Door Roller Assembly, 1-1/4 in. Diameter, Steel Ball Bearing... ... more | go to store |
This is a 1-1/4 in. steel ball bearing roller with adjustable steel housing assembly. Replaces old-style extruded aluminum assembly. 3/4 in. overall thickness at dimples. Used by International and a variety of other glass door manufacturers. |... ... more | go to store |
Replace or repair broken or missing sliding door rollers with this Prime-Line D 1998 Steel Sliding Door Roller Assembly. The stamped steel patio door rollers replacement is adjustable. This door roller assembly is used by a variety of metal framed... ... more | go to store |
This is a F-tab patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. When the corner screw passes through the F-tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The... ... more | go to store |
This roller is constructed from steel. It comes affixed to an adjustable steel housing. Used by Air Control, Howmet, Krestmark, and a variety of other sliding glass door manufacturers. | Prime-Line Sliding Door Roller Assembly w/ 1-1/2 in. Steel Ball... ... more | go to store |
This pocket door roller assembly is constructed of a steel bracket housing, and it comes in a zinc colored finish. The bracket’s base measures 2-1/2 inch x 1-3/8 inch, and the wheel has a maximum adjustment height of 2-1/4 inch. From the lowest... ... more | go to store |
These shower door rollers are constructed of durable plastic and include a threaded hex hub manufactured into each wheel. Wheels like these are used to replace missing or damaged wheels on shower door roller assemblies and the like. These rollers... ... more | go to store |
This is a unique housing patio door roller assembly. It is 3/4 in. wide and 2-1/8 in. long with a 1-1/4 in. diameter steel ball bearing roller attached. To install, remove the screw from the back and insert the assembly into the bottom rail end.... ... more | go to store |
This is a unique back patio door roller assembly with a 1-1/4 in. concave steel ball bearing roller. It's has a tab design on the bottom back edge that snaps the roller assembly into place on the door stile edge before being held in place by a mounting... ... more | go to store |
This Mirror Door Roller is constructed of an extruded aluminum housing, and it comes in a milled aluminum finish. This housing bracket also features a round extruded boss, and it is used by Monarch Door Company on their “500” series aluminum-framed... ... more | go to store |
This is an diecast plain back patio door roller assembly with a 1-1/4 in. concave Plastic ball bearing roller used by Trimview and a variety of patio door manufacturers. It's diecast plain back housing is 11/16 in. wide, 1 in. tall and 2-5/8 in. long.... ... more | go to store |
Ads related to Prime-Line 1-1/2 in. Steel Ball Bearing, Plain Back, Roller Assembly, for Fleetwood Single Pack 6.44 H x 3.81 W x 0.63 D in brown | Wayfair